Removing The Speaker Assembly; Replacing The Speaker Assembly - Dell Studio 1535 Service Manual

Back to Contents Page
Speaker Assembly
Dell™ Studio 1535/1536 Service Manual

Removing the Speaker Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in Before You
2. Remove the palm rest (see
3. Remove the four screws (two on each side) on the speakers.
4. Release the speaker cable from the securing tabs on the palm rest and take out the speaker assembly.
1 screws (4) 2 speaker cable

Replacing the Speaker Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Replace and tighten the four screws securing the speaker assembly to the palm rest.
2. Route the speaker cables carefully through the securing tabs on the palm rest.
3. Replace the palm rest (see
Back to Contents Page
Begin.
Removing the Palm Rest).
Replacing the Palm Rest).