1 back
2 right
3 front
4 left
Screw Identification
When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the screws. The placemat provides the
number of screws and their sizes.
NOTICE:
When reinstalling a screw, you must use a screw of the correct diameter and length. Make sure that the screw is properly aligned with its
corresponding hole, and avoid over tightening.
Hard Drive Door:
(1 each)
Display Bezel:
(6 each)
Rubber screw covers (6 each)
Display Assembly to Top Cover: Display-Feed Flex Cable:
Keyboard to
Bottom Case:
(5 each)
Hinge Bracket to Bottom Case:
(5 each)