Toshiba B-EV4 Series Manual page 18

2. ELECTRONICS SPECIFICATIONS
JP2 (SD Card Slot):
Signal
CD/DAT3
CMD
VSS1
VDD
CLK
VSS2
DAT0
DAT1
DAT2
GND
GND
CD
WP
JP3 (Ethernet):
Signal
Tx+
Tx-
Rx+
N/C
N/C
Rx-
N/C
N/C
Cathode of
the Yelleo LED
+3.3V (Anode of
the Yellow LED
Cathode of
the Green LED
+3.3V (Anode of
the Green LED
Type: MS3B11-KAA-0
This connector is connected to the SD Card.
Pin
Note: Recommended SD card specification.
No.
• Supported DOS FAT file system.
1
• Folders stored in the SD card should be in the 8.3 filename format.
2
3
• Approved SD card manufacturers: SanDisk, Transcend.
4
SD V 1.0, V 1.1: 128MByte, 256MByte, 512MByte, 1GByte
5
SD V 2.0 (SDHC): 4GByte Class 6
6
7
8
9
10
11
12
13
Type: RJ45 with 2LEDs (Yellow and Green)
This connector is used for the Ethernet (10BASET/100BASETX).
Pin
No.
1
2
3
4
5
6
7
8
9
10
11
12
2-5
EO18-33025
2.3 Description of the Main PC Board