Replacing The Platen Ass'y - Toshiba B-EV4 Series Manual

3. REPLACING THE IMPORTANT PARTS

3.4 Replacing the Platen Ass'y

1. Refer to section 3.1 to open the top cover.
2. Release the platen holder tabs from the lower inner cover and vertically raise them.
3. Remove the platen ass'y.
Platen Holder Tab
Platen Ass'y
4. Replace the platen ass'y with a new one, then reassemble in the reverse order of
removal.
5. After replacing, perform a diagnostic test print or print a sample label to make sure the
printer performs correctly for the following points.
• The label is issued correctly.
• No noise is generated during the print operation.
• None of blurred print, smudge, etc. is generated.
3-9
EO18-33025
(Revision Date: Mar. 27, 2009)
3.4 Replacing the Platen Ass'y