Program Selection; Automatic Programs; Time Programs; Indicator Of Program Sequence - Bosch V20-UL Operating, Care And Installation Instructions Manual
Hide thumbs
Also See for V20-UL:
Table of Contents
Advertisement
Program selection
For optimum
drying results your
Time
dryer offers several program
groups
and additional
options.
Select the required drying program
from the program table according
to the examples
(see page 22).
Automatic
programs
There are automatic
programs
for
different types of textiles
(regular/cotton,
permanent
press).
Regular/Cotton
programs
Time programs
run at specific
temperatures.
Suitable for predried,
multi-ply,
delicate textiles or
individual small items. Also for
subsequent
drying.
-
Warm 40 min.
-
Touch up (20 min) for extreme
temperature
sensitive textiles.
Option
Permanent
Press
The program
sequence
of
automatic
programs
is controlled
via sensors. The duration
of the
program
depends
on the measured
degree of moisture
in the laundry
and on the selected degree of
dryness (e.g. damp dry or extra dry).
_? _i_¢_ ¸
Delicates
low temp.
Press the Delicates
low temp.
button for temperature
sensitive
textiles. Observe the care
information
or symbols on the
textiles. The temperature
of the
drying process
is reduced, the
drying time is extended.
[-_
For extreme temperature
sensitive textiles
(e.g. camisoles,
paints) press
the Delicates
low temp.
button to reduce the
temperature
of the drying
process.
Indicator
of program
sequence
The dryer uses an electronic
scanning system for all programs
except the time programs.
A moisture
sensor continuously
checks the moisture
in the laundry.
Drying ends automatically
as soon
as the selected
degree of dryness
has been reached.
The drum continues
to rotate at
specific intervals for one hour to
prevent creasing.
The current state of the process
and the level reached during the
program
sequence
is indicated
via indicator lights (Drying, Damp
dry, Regular dry, Wrinkle blocW
End).
@Drying
@ Damp dry
[-_lf
the indicator
light Wrinkle
blocWEnd
illuminates
when
the program
selector is in
Off-Position
- turn off the
circuit breaker and call for
customer
service!
15
Advertisement
Table of Contents
