If The Projector Is Equipped With Both Dvi-D; Port And Hdmi Port, Use This Button To Select; Switch Source; Dvi-D, Hdmi - Epson 4.4 Operation Manual

Using the control functions
The following table lists the control button functions.
Power On Turns the projector power on.
Power Off Turns the projector power off.

Switch source

Switches the video input source to the
Computer1 Computer1 port or Computer port.
Switch source Switches the video input source to the
Computer 2 Computer2 port.
Switch source Switches the video input source to the BNC
BNC port.
Switch source Switches the video input source to the
S-Video S-Video port.
Switch source Switches the video input source to the Video
Video (RCA) port or video2 port.
Switch source Switches the video input source to the Video1
Video (BNC) port.
Switch source Switches the video input source to the DVI-D1
DVI-D, HDMI 1 port or HDMI1 port.
If the projector is equipped with ether DVI-D
port or HDMI port, use this button to switch
the input signal.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
DVI-D as an input source.
Switch source Switches the video input source to the DVI-D2
DVI-D, HDMI 2 port or HDMI2 port.

If the projector is equipped with both DVI-D

port and HDMI port, use this button to select

HDMI as an input source.
Switch source Switches the video input source to the D4
D-Video port.
Switch source Switches the input source to EasyMP or
EasyMP EasyMP.net.
Switch source Switches the input source to USB Display.
*
USB Display
Switch source Switches the video input source to the
*
USB1 external equipment connected via a USB
(Type A) port or USB1.
Switch source Switches the video input source to the
*
USB2 external equipment connected via a USB2
port.
Switch source Switches the video input source to the image
*
LAN projected by the computer via a network.
* If the button does not function, you can switch the input source using the
button.
• Some connected projectors may not be equipped with all of the above ports
q
or functions. If you click a button for a port or function that is not
available, nothing will happen.
• You can select objects to be controlled and use the control buttons to carry
out control operations even when the following are being displayed.
Group properties s p.31
Projector properties s p.32
Warning and Error Projector list
(Control operations can only be carried out for projectors with a warning
status.) s p.28
35