NEC Express5800 1080Xd User Manual page 36

USERS_GUIDE_1080XD_hw
1.4.7.5.2 DN (Shut down System Power)
Function:
Turn off the DC power of the system.
Turn off the power of the system if the software (OS, BIOS and so forth) is not operating.
If the software (OS, BIOS and so forth) is operating (S0 status), report a power button
interruption to the software and the process against the power button interruption depends
on the software (the software may ignore the power button interruption or execute the
shutdown process and turns off the power).
Sometimes power button interruption may not be processed even when iSP recognizes as
"Software Operating". In this case, please use the DF command to force the power of the
system to be turned off.
(Screen Image)
iSPyz: ---> dn<ENTER>
System power will be turned off if the software(OS) is NOT running.
Only power button interrupt will be generated if the software(OS) is running.
If you want to turned off the system power in any system state, use DF
command.
Enter partition number (0-7/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
DN command was accepted. System power of all partitions will be turned off or
power button interrupt will be ganerated soon.
[iSPyz: INFO.ccc] partition 0 : power button interrupt.
[iSPyz: INFO.ccc] partition 1 : power button interrupt.
[iSPyz: INFO.ccc] partition 2 : power off sequence started.
:
:
:
[iSPyz: INFO.ccc] partition 2 : power off sequence completed normally.
(Description)
Description
code
(a)
(b)
(c)
(d)
1-36
Enter the partition number.
If you select "all", all the configured partitions are set to be objects.
Display a confirmation message.
Enter "y" to continue the operation.
Display a command acceptance message.
Actual process operates in the background.
Display the operation status in the background.
Available against a partition in operation
(after automatic boot/UP command
executed)
Description
NML MNT
X X
Description
code
(a)
(b)
(c)
(d)