Sp Command Console Buffer; Sp Command Prompt; Sp Message Header - NEC Express5800 1080Xd User Manual

USERS_GUIDE_1080XD_hw
1.4.7.4.1

SP command console buffer

The output of the SP command console of iSP may include some important information
such as the cause of system status change. For operation on the premises of the LAN
console, any console output cannot be monitored, which is executed between the
initialization of iSP and the establishment of the LAN console. For this reason, iSP has the
function to save certain message outputs, which is executed while the SP command console
is not established, in the buffer temporarily.
This buffer has about 1,000 lines of space and saves 1,000 lines of messages.
The content of the buffer can be displayed using the "ML" command.
1.4.7.4.2

SP command prompt

In the SP command mode, if you press the "ESC" key, a command prompt in the following
format is displayed.
iSP yz: --->
1.4.7.4.3

SP message header

Basically the SP message is output with a header in the following format.
If an interactive dialogue is executed in each SP command, all prompts or messages are not
attached with any message header.
[iSP yz: INFO.cccc] string
[iSP yz: WARN.cccc] string
[iSP yz: ERRORcccc] string
1-32
Prompt
Message Header
Description
Command prompt in the normal mode.
Description
Information message.
cccc is an ID attached to an individual message.
string is the message body.
Alert message.
Error message.