NEC Express5800 1080Xd User Manual page 67

USERS_GUIDE_1080XD_hw
The following table includes the functions of each menu.
Menu
Serial Port Select
Debug Port Select
System Serial Port
Serial Port 1
Note: Serial Port
You may view two serial ports (COM1, COM2) from various applications including OS or
ESMPRO, but you can only use COM2 (System Serial Port) and you cannot use COM1
(Serial Port1) as it is an internal port.
Parameter
Disable
[System Serial Port ]
Serial Port 1
[Enable]
Disable
Each serial port is displayed with the following names from the device manager on
OS.
Serial Port1: COM1
System Serial Port: COM2
Description
Sets the port to use the serial console function.
Sets if the EFI error output console and the OS debug
console are used or not.
Sets Baud Rate/Console Type/Flow Control used for
System Serial Port.
Sets Baud Rate/Console Type/Flow Control used for
Serial Port1.
[ ]: Factory Setting
1-67