Chapter 1 Maintenance
9.3
Console-less feature
Off-line Tools can be remotely controlled from "PC for Management" without a keyboard or other consoles.
9.3.1
How to remotely control
Control from a LAN connected PC for Management using the remote KVM of EXPRESSSCOPE Engine 3.
For details of the remote KVM, see "EXPRESSSCOPE Engine 3 User's Guide" in EXPRESSBUILDER.
You can also control Off-line Tools remotely by using BIOS Console Redirection.
9.3.2
Preparation
Set the remote management feature of EXPRESSSCOPE Engine 3 in advance to check hardware error
information during console-less operation.
For settings information, see "EXPRESSSCOPE Engine 3 User's Guide" or NEC ESMPRO Manager online
help.
• Connect the LAN cable to the connector on management LAN port.
Note
If Shared BMC LAN feature is used, connect the LAN cable to the corresponding LAN
connector.
• To use the remote KVM, Remote Management Extension License (N8115-04) is
required.
Tips
In console redirection connection, if corrupt texts are displayed on terminal screen, specify
the font type (character code) appropriate to your computer.
Express5800/R120f-1E Maintenance Guide
9. Offline Tools
53