Chapter 1 Maintenance
9.3
Console-less feature
Offline Tools can be remotely controlled from "PC for Management" without a keyboard or other consoles.
9.3.1 How to remotely control
Control from a LAN connected PC for Management using the remote KVM of EXPRESSSCOPE Engine 3.
For details of the remote KVM, see "EXPRESSSCOPE Engine 3 User's Guide" in EXPRESSBUILDER.
You can also control Offline Tools remotely by using BIOS Console Redirection.
9.3.2 Preparation
Enable the remote management feature of EXPRESSSCOPE Engine 3 in advance to check the hardware error
during console-less operation.
See "EXPRESSSCOPE Engine 3 User's Guide" or NEC ESMPRO Manager online help.
Note
Connect the LAN cable to the connector on management LAN port.
If Shared BMC LAN feature is used, connect the LAN cable to the corresponding LAN
connector.
Express5800/B120f Maintenance Guide
9. Offline Tools
53