NEC Express5800 Series Maintenance Manual page 187
Express server
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Useful Features
13.
On the setup menu of each logical port, put the cursor onto iSCSI Offload Protocol and select
Enabled.
Press the <ESC> key to return to NIC Partition Configuration.
Confirm that "Eth:iSCSI" is displayed for the port for which you have set Enabled to iSCSI Offload
Protocol.
Repeat steps 12 to 14 for other logical ports if necessary.
14.
Press the <ESC> key to return to Device List.
Repeat steps 8 to 14 for other devices if necessary.
15.
Press the <ESC> key to return to Exit Configuration, and then select Exit and Save
Configurations.
16.
Press any key to close Configuration Menu.
Tips
In the case of the NPAR mode, up to two protocols can be set to Enabled for each port.
Express5800/B120f Maintenance Guide
10. Advanced LAN Configuration
187
Advertisement
Table of Contents
