Chapter 2 Useful Features
5.
The following message is displayed, and the LED of the target Physical Device lights up.
(b) Procedure for performing Locate of Virtual Drive
1.
Select "Virtual Drive Management" from the HII main menu, and press the <Enter> key.
2.
Select the Virtual Drive for which Locate is performed, and press the <Enter> key.
3.
Select "Start Locate" from the "Operation" menu, and press the <Enter> key.
Tips
To stop the Locate operation, select "Stop Locate" from the "Operation" menu, and
perform "Go".
Express5800/B120f Maintenance Guide
4. RAID System Configuration
161