Chapter 2 Useful Features
Parameter
None
PXE
iSCSI
6. Press the <ESC> key to return to Main Menu.
7. Press the <ESC> key to return to Device List.
If any parameter is changed, Exit Configuration appears.
Select Exit and Save Configurations.
If you want to configure any other port, repeat the steps 3 through 7.
8. Press POWER Switch to turn off DC power.
The setting is now complete.
10.4
Precautions on Using Internal Flash Memory
If you use EXPRESSBUILDER installed in internal flash memory on CPU blade, you cannot install an OS to
iSCSI target disk.
To install an OS to iSCSI target disk, start the system from EXPRESSBUILDER DVD provided with your server,
and install an OS.
190
Description
Does not specify Boot Protocol.
Performs PXE Boot.
Performs iSCSI Boot.
Express5800/B120f Maintenance Guide
10. Advanced LAN Configuration