NEC Express5800 Series Maintenance Manual page 126

Chapter 2 Useful Features
3. Place a cursor on the swapped Physical Device whose status is Ready as checked in <1>, and press
the <Enter> key to select it. After selecting, place a cursor on "OK", press the <Enter> key to set the
specified Drive Group to the targeted Hot Spare (Dedicated Hot Spare Drive).
4. The Physical Device is installed to the slot displayed as "Missing", and becomes the Rebuild status.
Placing a cursor on the Physical Device during the Rebuild process displays the progress on the right
side of the screen.
5. After completion of the Rebuild, the status of the Physical Device in the middle of the Rebuild process
shows "Online", and the status of the Virtual Drive shows "Optimal".
126
Express5800/B120f Maintenance Guide
4. RAID System Configuration