Problem Of Windows Stop Error; Problem Of Raid System - NEC EXP803 Maintenance Manual

Chapter 1 Maintenance
[?] The following message appears when logging in the system on Windows Server 2008 R2 or Windows
Server 2008
 Have you finished license authentication for Windows product?
→
The above message will appear if you use Windows Server 2008 R2 or Windows Server 2008 with the
unauthenticated license.
Choose Get genuine now and proceed license authentication.
The above message is an example of request for license authentication. The message displayed on
screen is subject to change depending on the license.
5.5

Problem of Windows STOP Error

[?] Cannot turn the power OFF at the blue screen (STOP error screen)
→
Perform the forced shutdown (continue to press the power switch at least four seconds) to turn off the
server.
5.6

Problem of RAID System

[?] Unable to rebuild the RAID array
 Is the capacity of the hard disk drive to be rebuilt correct?
→
Use a hard disk drive with the same capacity as that of the faulty hard disk drive.
 Is the logical drive RAID0?
→
RAID0 cannot be rebuilt because it has no redundancy. Replace the failed hard disk drive, reconfigure
the RAID array, and recover the drive using backup data.
34
Express5800/R120f-1E Maintenance Guide
5. Troubleshooting