Table of Contents
Advertisement
Chapter 2 Useful Features
12. For RAID1/RAID10, boot up the OS and run Check Consistency using Universal RAID Utility.
Refer to the Universal RAID Utility User's Guide for how to run Check Consistency.
Important
Note
13. Press the <Esc> key to return to the TOP menu and exit the utilities.
•
In the UEFI mode, Check Consistency on the LSI Software RAID Configuration
Utility takes long time. Run Check Consistency from the Universal RAID Utility
on the OS.
•
Inconsistency may be detected at the first time of the consistency check, but
there is no problem.
For RAID0, running Check Consistency is not required.
Express5800/R120f-1E Maintenance Guide
5. RAID System Configuration
151
Advertisement
Table of Contents
