Table of Contents
Advertisement
Chapter 2 Useful Features
5.
RAID System Configuration
This section describes the LSI Software RAID Configuration Utility.
The utility resides in LSI Embedded MegaRAID and is an OS-independent program.
5.1
Running LSI Software RAID Configuration Utility in the Legacy
Mode
On the POST screen after power-on, press the <Ctrl>+<M> key or <Enter> key when the following message
appears. The LSI Software RAID Configuration Utility starts.
Press Ctrl-M or Enter to run LSI Software RAID Configuration Utility
Tips
*1: "x" in LSI Software RAID Configuration Utility Verx.xx represents the version of utility.
*2: mm dd, yyy represents created date.
*3: "z" in BIOS Version z.zz.zzzzzzzz represents the version of LSI Software RAID BIOS.
If you fail to press <Ctrl>+<M> keys or <Enter> key, or the system proceeds without
displaying the following screen, restart the system, and press <Ctrl>+<M> keys on POST
screen.
LSI Software RAID Configuration Utility Ver x.xx mm dd, yyyy
BIOS Version z.zz.zzzzzzzzz
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Express5800/R120f-1E Maintenance Guide
Configure VD(s)
5. RAID System Configuration
119
Advertisement
Table of Contents
