Panasonic WV-Q204/1 Instructions

Panasonic rack mount bracket

Download this manual

Before attempting to mount this product,

please read these instructions carefully and save this manual for future use.

These Rack Mounting Brackets are used for mounting such as the WJ-NT104, etc.

INSTALLATIONS

The installation described below should be made by qualified service personnel or system installers.

Mounting in a Rack

WV-Q204/1 can mount the WJ-NT104 on the rack.

WV-Q204/2 can mount side by side up to two WJ-NT104s on the rack.

Illustrations as shown below are examples to install WJ-NT104 and WJ-NT104s.

1. Remove the four rubber feet by removing the four screws from the bottom of the WJ-NT104.

Mounting one WJ-NT104 with the WV-Q204/1

2. Fix the mounting brackets (large and small) on both sides of the WJ-NT104 with the eight supplied screws (M3x8) as

shown below.

Rubber feet

Rack mounting

bracket (small)

Model No.

Rack mounting

bracket (large)

Rack Mount Bracket

WV-Q204/1

WV-Q204/2

Page 1 The installation described below should be made by qualified service personnel or system installers. Mounting in a Rack WV-Q204/1 can mount the WJ-NT104 on the rack. WV-Q204/2 can mount side by side up to two WJ-NT104s on the rack. Illustrations as shown below are examples to install WJ-NT104 and WJ-NT104s.
Page 2 5770 Ambler Drive, Mississauga, A Division of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Panasonic Sales Company Regional Offices: Division of Matsushita Electric of Puerto Rico Inc.

Wv-q204/2