GE Everest Ca-Zoom 6.2 Operating Manual page 24

Lights
Usage
• Adjust light output level from lamp.
• Turn lamp On/Off.
Access (PTZ70)
• Press Light (Spot) to operate 4-spot light.
• Press Light (Flood) to operate 4-flood light.
Access (PTZ00)
• Press Light (left) to operate top light.
• Press Light (right) to operate bottom light.
Access (PTZ40)
• Press Light (left) to operate left-hand light.
• Press Light (right) to operate right-hand light.
Operation
• Displays light level gauge bar in top right corner of screen showing relative light level,
name of light (Right or Left) and type of lamp being controlled (as defined in Camera Setup
menu)
• When the system is in light mode, the light level indicator will be displayed in the top right
corner of the screen for 3 seconds after the Light button has been pressed.
• Soft buttons "FULL ON, LAMP UP, LAMP DOWN, FULL OFF and TURBO" will be displayed.
• Pressing soft buttons associated with text descriptions will execute the command.
Exit
• Wait for the soft button operation to time out.
Lights Screen (PTZ140)
Figure 7
®
Everest Ca-Zoom 6.2
23