GE Everest Ca-Zoom 6.2 Operating Manual page 60

LANGUAGE
Feature Summary
• The PTZ system can be configured to display all on-screen menus and instructions in English,
or any one of five other languages.
• The PTZ system is shipped from the GE Inspection Technologies' factory with the English
language set as the active language. The following languages are installed in the PTZ system
memory, and may be activated via the SETUP MENU:
• English
• German
• Italian
• Swedish
• Future language option
Menu Feature LANGUAGE SELECT
Access
• Highlight LANGUAGE. A drop down will appear.
Operation
• Move the arrow pointer to SELECT (choose language desired).
To Accept
• Press ENTER to choose the new language.
• Press MENU to accept the menu choice, and return to the screen you were in prior to
accessing the SETUP Menu
LOADING LANGUAGE FILES
New language files may be loaded via the setup menu language feature.
Only language files supplied by GE Inspection Technologies, or a GE Inspection Technologies
authorized representative should be loaded into the PTZ system.
Operation
• Insert a CompactFlash card containing the new language file into the disk drive in the
CCU.
• Highlight LANGUAGE LOAD
• Press ENTER. The iV
IEW
card, and automatically install those files.
Note: The new language file which was loaded is not automatically selected. You must use
the LANGUAGE SELECT menu feature to activate a language.
software will search for language files on the CompactFlash
®
Everest Ca-Zoom 6.2
59