Dual Tone Multi-Frequency (Dtmf); Manual Dialing; Dtmf Hold; Automatic Dialer - Kenwood TM-D710A (K type) Instruction Manual

144/440 mhz fm dual bander, 144/430 mhz fm dual bander, (k, m4, e type)

Hide thumbs Also See for TM-D710A (K type):

Service manual (98 pages)

Manual (65 pages)

Instruction manual (51 pages)

Table Of Contents

Table of Contents

The keys on the microphone keypad function as DTMF keys; the 12 keys found on a push-button telephone plus 4

additional keys (A, B, C, D). This transceiver provides 10 dedicated memory channels. You can store a DTMF code with

up to 16 digits.

Some repeaters in the U.S.A. and Canada offer a service called Autopatch. You can access the public telephone network

via such a repeater by sending DTMF tones. For further information, consult your local repeater reference.

MANUAL DIALING

Manual Dialing requires only two steps to send DTMF

tones.

1 Press and hold the microphone [PTT].

2 Press the keys in sequence on the keypad to send

DTMF tones.

•

The corresponding DTMF tones are transmitted.

•

If the DTMF Hold function is activated, you need not hold

down [PTT] while pressing keys. After transmitting the

first tone (by pressing [PTT] and the first key), pressing

additional keys will keep the transceiver in transmit mode

for 2 seconds.

Frequency (Hz)

1209

697

[1]

770

[4]

852

[7]

941

[ ]

■ DTMF Hold

Activate this function to remain in transmit mode, after

beginning to press keys when making a call.

1 Enter Menu mode and access Menu 300.

2 Set DTMF Hold to ON to continue transmitting when

pressing keys.

•

Set this menu to OFF to stop the 2 second continuous

transmission.