Siemens 
D12-52 Operating And Installation Instruction page 11

: Overdosage
G
Childproof lock
Fan
Recommended load
Spin speed
Washing temperature
Programme duration
The automatic safety system detects excessive froth
in the appliance due to a highly frothing detergent or
an overdosage. This is indicated in the display field by
the : symbol. Dispense less detergent for the next
wash with similar items of washing (same degree of
soiling and wash load).
Overdosage of detergent may cause excessive froth
formation and impair the washing and rinsing results.
A rinse cycle is automatically run.
i The : symbol goes out when the appliance
switches off at the end of the programme or if the
programme is changed.
The activated childproof lock prevents the selected
programme from being changed while the
programme is running.
The fan works at the last period of drying duration for
cooling the laundry.
i Do not interrupt this cooling process.
The recommended load is displayed depending on
the selected programme and additional functions, see
from page 22.
The default spin speed is displayed depending on the
selected programme and additional functions.
You can change this speed, see page 32.
The default washing temperature is displayed after
selecting the programme and it can be changed by
touching the Temp. button, see page 32.
When the programme has been selected, the
expected programme duration (time after which the
programme is expected to end) is displayed.
The programme duration is displayed in hours and
minutes, e.g.
1:30 = 1 hour and 30 minutes
0:35 = 35 minutes.
When the programme has started, the programme
duration counts down in minutes.
11