Transport,
e.g. when moving
Preparing and inserting the
transport bolts
62
Before transporting the washer dryer:
- Turn off the tap.
- Reduce the water pressure in the water inlet hose
(refer to page 46).
- Drain any residual washing solution (refer to
page 45).
- Disconnect the washer dryer from the mains.
- Dismantle the supply and drainage hose.
- Install transportation protection devices.
Having transported the appliance and ensured
proper installation and connection, allow the Empty
programme to run through before starting the first
wash programme.
Transporting the washer dryer:
q Remove the 4 covers C.
q Remove the rear cover D and prepare the
transport bolts.
q Insert and tighten the transport bolts.