Siemens 
D12-52 Operating And Installation Instruction page 61

Connecting the
power
Caution
Connect the washer dryer only to an alternating
current via a correctly installed earthed socket.
The mains voltage must correspond to the voltage
specification on the washer dryer (nameplate).
Connection specifications as well as the required
fuses are stipulated on the appliance nameplate.
Ensure that:
- The mains plug and socket are compatible.
- The cable cross section is adequate.
- The earthing system has been installed correctly.
The mains cable may be changed (if required) by an
electrician only.
Replacement mains cable available from Customer
Service.
Do not use multiple plugs/sockets or extension
cables.
In the event that an earth leakage circuit breaker is
to be used, only use types marked with the following
symbol: 7.
Only this symbol can guarantee compliance with all
current regulations.
Do not insert/pull out the mains plug with wet hands.
Do not pull out the mains plug by tugging the cable.
61