To Use The Unit Safely - Brother ADS-1000W Quick Setup Manual

Product Safety Guide

To use the unit safely

WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you
could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the unit. Before you access the inside of the machine,
including for routine maintenance such as cleaning, make sure you have unplugged the power cord
from the AC power outlet.
DO NOT push objects of any kind into the unit through slots or openings in the cabinet, as they may
touch dangerous voltage points or short out parts.
DO NOT continue using the unit if it has been dropped or the cabinet has been damaged. Instead,
unplug the unit from the power outlet and contact Brother Authorized Service Personnel.
The unit should be connected to an AC power source within the range indicated on Specifications in
the User's Guide. DO NOT connect it to a DC power source or inverter. Doing this might cause an
electrical shock or a risk of fire. If you are not sure what kind of power source you have, contact a
qualified electrician.
If water, other liquids, or metal objects get inside the unit, immediately unplug the unit from the AC
power outlet and contact Brother Authorized Service Personnel.
Power Cord Safety:
• Use only the power cord supplied with this product.
• DO NOT allow anything to rest on the power cord.
• DO NOT place the unit where people can walk on the cord.
• DO NOT place the unit in a position where the cord is stretched or strain is otherwise put on the
cord, as it may become worn or frayed.
• DO NOT use the unit or handle the cord if the cord has become worn or frayed. If unplugging the
unit, DO NOT touch the damaged/frayed part.
• Brother strongly recommends that you DO NOT use any type of extension cord.
23