Second Side Ccd Unit / Second Side Ccd Flat Cable - Brother PDS-5000 Service Manual

9.20 Second side CCD unit / Second side CCD flat cable

(1) Release the second side CCD flat cable from the securing fixtures.
Note:
• Be sure to replace the double-sided tape with a new one, after taking off the flat
cable from the double-sided tape.
(2) Remove the taptite bind B M3x10 (black) screw from the upper base ASSY.
Note:
• Do not touch the glass surface of second side CCD unit.
Second side
CCD flat cable
Upper base ASSY
(3) Turn the second side CCD unit so that the cut surface of the left shaft and rib of the
bushing match, and remove it from the upper base ASSY.
Second side
CCD unit
Upper base ASSY
Taptite bind B M3x10 (black)
Fig. 3-46
Shaft
Fig. 3-47
3-39
Second side CCD unit
Rib
Confidential