9.23 Feed drive belt S / Feed drive belt / Feed motor
(1) Remove the feed drive belt S.
(2) Loosen the taptite cup S M3x6 screw.
(3) Remove the feed drive belt while pushing the tension pulley holder in the direction of the
arrow.
(4) Remove the two taptite cup S M3x6 screws to remove the feed motor.
Taptite cup S M3x6
(5) Disconnect the feed motor harness from the feed motor.
(6) Remove the two gaskets from the feed motor.
Gaskets
Feed motor
Feed drive belt
Feed drive belt S
Tension pulley holder
Taptite cup S M3x6
Fig. 3-58
Feed motor harness
Fig. 3-59
3-47
Feed motor
Confidential