First Side Ccd Unit / First Side Ccd Flat Cable - Brother PDS-5000 Service Manual

9.28 First side CCD unit / First side CCD flat cable

(1) Turn over the lower base.
(2) Remove the taptite bind B M3x10 (black) screw from the upper base ASSY.
Note:
• Do not touch the glass surface of first side CCD unit.
(3) Turn the first side CCD unit so that the cut surface of the right shaft and rib of the
bushing match, and remove it.
Upper base ASSY
Fig. 3-66
First side CCD unit
Shaft
Fig. 3-67
Taptite bind B M3x10 (black)
First side CCD unit
3-52
Rib
Confidential