First Side Cis Unit - Brother ADS-2000 Service Manual

9.21 First side CIS unit

(1) Turn over the lower chute ASSY. Release the hook from the hole on the lower chute ASSY,
and remove the first side CIS unit from the lower chute ASSY while lifting and pulling it in
the direction of the arrow. Then, pull out the first side CIS flat cable from the hole on the
lower chute ASSY.
(2) Disconnect the first side CIS flat cable from the first side CIS unit.
First side CIS flat cable
First side CIS unit
Hole
Lower chute ASSY
Fig. 3-39
3-39
Hook
Hole
Confidential