Usb Host Pcb Assy - Brother ADS-2000 Service Manual

9.8

USB host PCB ASSY

(1) Remove the taptite bind B M3x10 screw, and remove the earth harness (BK).
(2) Release the USB host PCB harness, the earth harness (BK), the double feeding sensor
harness (Receive), and the front cover sensor harness from the securing fixtures.
(3) Remove the two taptite bind B M4x12 screws. Lift the USB earth plate to remove the USB
host PCB ASSY from the machine.
Note:
• Be careful not to deform the USB earth plate.
Taptite bind B M4x12
USB host PCB harness
USB earth plate
HARNESS ROUTING: Refer to
USB host PCB ASSY
Fig. 3-14
"1. Main PCB ASSY" and
3-19
Taptite bind B M3x10
Earth harness (BK)
Double feeding sensor
harness (Receive)
Front cover sensor harness
"3. Frame R".
Confidential