Second Side Cis Unit - Brother ADS-2000 Service Manual

9.13 Second side CIS unit

(1) Turn over the upper chute.
(2) Release the two hooks, lift the second side CIS unit, and pull out the second side CIS flat
cable from it.
(3) Pull out the second side CIS flat cable from the hole on the upper chute.
(4) Remove the CIS spring from the upper chute.
Second side CIS unit
CIS spring
Hook
Second side CIS flat cable
Upper chute
Hook
Second side CIS flat cable
Fig. 3-27
3-29
Confidential