Setting By Country; Initializing The Eeprom Of The Main Pcb Assy - Brother ADS-2000 Service Manual

1.2

Setting by Country

(1) Press and hold the [Stop] and [Scan to USB] buttons simultaneously, and plug the AC
cord into the outlet. The Power LED and the Error LED light.
(2) Press the [Stop], [Scan to USB], [Scan to PC], and [Stop] buttons in this order. The Scan
to PC LED and the Scan to USB LED light.
(3) Press the [Scan to PC] button. The Scan to PC LED and the Scan to USB LED go out.
(4) Connect the computer to the machine with the USB cable.
(5) Turn ON the power switch of the computer.
(6) Press and hold the [Stop] button until the Power LED lights.
(7) Open the temporary folder and double-click "Filedg32.exe" to start it, and select the
"Brother Maintenance USB Printer".
(8) Drag and drop the Country code setting PJL file in the temporary folder onto the "Brother
Maintenance USB Printer" icon. The country code information is loaded to the machine
and written to the flash ROM.
(9) Wait for several seconds, and the country code that has been set is displayed on the
computer screen.
(10) Turn OFF the power switch of the machine, and disconnect the USB cable.
1.3

Initializing the EEPROM of the Main PCB ASSY

(1) Press and hold the [Stop] and [Scan to USB] buttons simultaneously, and plug the AC
cord into the outlet. The Power LED and the Error LED light.
(2) Press the [Stop], [Scan to USB], [Scan to PC], and [Stop] buttons in this order.
The Scan to PC LED and the Scan to USB LED light.
(3) Press the [Scan to PC] button. The Scan to PC LED and the Scan to USB LED go out,
and the machine enters maintenance mode for service personnel.
(4) Press the [Scan to USB] button three times. The Scan to PC LED and the Scan to USB
LED light.
(5) Press the [Stop] button. The EEPROM of the main PCB ASSY is initialized.
(6) Turn OFF the power switch of the machine.
4-4
Confidential