Setting By Country; Cis Type Setting - Brother ADS-1000W Service Manual

1.2

Setting by Country

(1) Press and hold the
state. LEDs except WiFi LED light.
(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The
to USB, Error,
(3) Connect the computer to the machine with the USB cable.
(4) Turn ON the computer.
(5) Open the temporary folder and double-click "Filedg32.exe" to start it, and select the
"Brother Maintenance USB Printer".
(6) Drag and drop the Country code setting PJL file in the temporary folder onto the "Brother
Maintenance USB Printer" icon. The country code information is loaded to the machine and
written to the flash ROM.
(7) Wait for several seconds, and the country code that has been set is displayed on the
computer screen.
(8) Unplug the AC adapter of the machine, and disconnect the USB cable.
1.3

CIS Type Setting

(1) Press and hold the
state. LEDs except WiFi LED light.
(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The
to USB, Error,
(3) Connect the computer to the machine with the USB cable.
(4) Turn ON the computer.
(5) Open the temporary folder and double-click "Filedg32.exe" to start it, and select the
"Brother Maintenance USB Printer".
(6) Drag and drop the "CDSM59-1-3-1_FS.pjl" file in the temporary folder onto the "Brother
maintenance USB Printer" icon. CIS type setting is completed. If the firmware is not the D
version or later, after drag and drop, the CIS type is not be completed with a beep.
key for five seconds or longer when the machine is in the ready
, and LEDs light and the machine enters the maintenance mode.
key for five seconds or longer when the machine is in the ready
, and LEDs light and the machine enters the maintenance mode.
4-3
Confidential