1.2
List of Maintenance Mode Functions
Function number
(binary number)
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
The maintenance mode functions shaded in the table can be used by end users.
The function numbers above are expressed by the ON/OFF status of the LEDs.
E.g.
0 = LED OFF
1 = LED ON
Save maintenance information
Save Net Config Print as text
Initialize EEPROM parameters
ADF performance test
Check sensor operation
Acquire white level data and set CIS scan area
Check control panel key operation
Backup machine information
Not in use
CIS type setting
Not in use
Install firmware from USB flash memory drive
Quit maintenance mode
Function
0110
5-2
Refer to:
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.3.6
1.3.7
1.3.8
-
1.3.9
-
1.3.10
1.3.11
Confidential