If You Replace The Pick-Up Roller / Separation Pad Assy; Resetting Pick-Up Roller / Separation Pad Counters - Brother ADS-1000W Service Manual

3. IF YOU REPLACE THE PICK-UP ROLLER / SEPARATION
PAD ASSY
<What to do after replacement>

• Resetting pick-up roller / separation pad counters

3.1 Resetting Pick-up Roller / Separation Pad Counters
(1) Press and hold the
state. LEDs except WiFi LED light.
(2) Press the [to USB], [to Network Device2], and [to Network Device1] keys in this order. The
to USB, Error,
(3) Press the [to Network Device2] key. All LEDs go out.
(4) Press the [to Network Device2] key again. The to Network Device2 LED lights.
(5) Press the
(6) Turn ON the computer.
(7) Connect the computer to the machine with the USB cable.
(8) Double-click "brmfrmss.exe" that was copied into the temporary folder to start remote
check mode. The screen shown below appears.
(9) Click the [Machine Info.] tab. Check the check box related to the part to be changed in the
Reset Counter for Consumables.
(10) Click the [OK] button to reset the counter for the selected part.
key for five seconds or longer when the machine is in the ready
, and LEDs light and the machine enters the maintenance mode.
key.
4-11
Confidential