Card Detection Sensor Pcb - Brother ADS-1000W Service Manual

8.23 Card detection sensor PCB

(1) Release the hook to remove the card detection sensor PCB from the machine. Disconnect
the card detection sensor harness from the card detection sensor PCB.
Hook
HARNESS ROUTING: Refer to
Assembling Note:
• Secure the card detection sensor harness in the securing fixtures as shown in the
illustration below.
Card detection sensor harness
Card detection sensor PCB
"8. Lower
Guide
Hook
Card detection sensor harness
Fig.3-34
chute".
Card detection sensor PCB
Fig.3-35
3-38
Confidential