Brother PDS-5000 Service Manual page 67

<Attachment Procedure>
1) Attach the double-sided tape as shown in the figure below. (two places)
2) Pass the first side CCD flat cable through the flat core "A", and connect it to the main
PCB ASSY.
3) Fold the second side CCD flat cable within the red frame as necessary, pass it through
the flat core "B", connect it to the main PCB ASSY, and attach it to the double-sided tape.
4) Connect the multi-feed sensor PCB flat cable (Receive) to the main PCB ASSY.
5) Attach the double-sided tape on the second side CCD flat cable as shown in the figure
below.
Second side CCD flat cable
Double-sided tape First side CCD flat cable
Double-sided tapes
Fig. 3-24
Flat core "B"
Flat core "A" Multi-feed sensor PCB flat cable (Receive)
Fig. 3-25
3-24
Main PCB ASSY
Confidential