Brother PDS-5000 Service Manual page 75

(2) Remove the two second side CCD glass springs from the upper base ASSY.
(3) Remove the two taptite bind B M3x10 (black) screws to remove the second side LED
light PCB ASSY from the upper base ASSY, and disconnect the second side LED light
PCB harness from the second side LED light PCB ASSY.
Note:
• Do not touch the LED section of second side LED light PCB ASSY.
Second side LED light PCB harness
Assembling Note:
• When attaching the second side LED light PCB ASSY, insert the tab of second side
LED light PCB ASSY into the groove.
Harness routing: Refer to
Taptite bind B M3x10 (black)
Tab Second side CCD glass springs
Fig. 3-37
"5. Second side LED light PCB harness"
ASSY".
Groove
3-32
Second side LED light PCB ASSY
Upper base ASSY
and "6. Upper base
Confidential