3.2 Checking Operation after Repair
Perform the steps below to check the machine's condition after repair or adjustment.
(1) Confirm that the machine is connected to your computer via USB cable.
(2) Set the test charts (density chart TC-027, density chart CTC-001, and density chart
TC-023) in the document feeder.
(3) Start the DS Capture.
The window below appears on the screen. Click the [Setup] button.
(4) The window below appears on the screen. Check the Front Color box ("A") and uncheck
the Front B&W box ("B").
"A"
"B"
4-33
Confidential