Pick-Up Drive Belt / Pick-Up Motor - Brother PDS-5000 Service Manual

9.26 Pick-up drive belt / Pick-up motor

(1) Remove the three retaining ring E3 to remove the gear "A", "B" and "C". Release the
hook to remove the gear "D", and remove the pick-up drive belt.
(2) Remove the two taptite cup S M3x6 screws to remove the pick-up motor.
Retaining ring E3
(3) Disconnect the pick-up motor harness from the pick-up motor.
Gear "C"
Gear "A" Gear "B"
Fig. 3-63
Fig. 3-64
Gear "D"
Hook Pick-up drive belt
Pick-up motor harness
Pick-up motor
3-50
Taptite cup S M3x6
Pick-up motor
Confidential