Connecting The Unit Safely - Brother ADS-1100W Quick Setup Manual

Product Safety Guide

Connecting the unit safely

WARNING
There are high-voltage electrodes inside the unit. Before you access the inside of the machine, (for
routine maintenance, such as cleaning), make sure you have unplugged the power cord from the
electrical socket. (This illustration is an example for Australia.)
DO NOT touch the AC adapter, or handle the plug with wet hands. Doing this might cause an electrical
shock. (This illustration is an example for Australia.)
DO NOT connect it to a DC power source or inverter. Doing this might cause an electrical shock. If you
are not sure what kind of power source you have, contact a qualified electrician.
DO NOT use the unit if the power cord is frayed or damaged, doing so may cause an electrical shock
or a fire.
DO NOT pull on the middle of the AC power cord. DO NOT allow anything to rest on the power cord.
DO NOT place the unit where people can walk on the cord. Doing this might cause an electrical shock
or a fire.
Brother strongly recommends that you DO NOT use any type of extension cord. Failure to observe
these precautions could cause fire, electric shock, or damage to the unit.
When disconnecting the AC adapter from the machine or from the power outlet, always hold the
connector, not the cable, and pull firmly. Failure to do so may result in exposed or broken power cord
wires, fire, or electric shock.
24