Brother ADS-1100W Quick Setup Manual page 10

Wireless Network
g
Choose your machine from the list, and then
click Next.
NOTE
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
h
The installation of the Brother drivers will
automatically start. Please wait for the software
to install.
10
NOTE
• (ADS-1100W)
You can find your machine's MAC Address
(Ethernet Address) in Network Status from the
Network tab, and IP address in TCP/IP
(Wireless) in Wireless from the Network tab,
in Web Based Management. See the Network
User's Guide.
(ADS-1600W)
You can display your machine's MAC Address
(Ethernet Address) and IP Address using the
machine's LCD. To find the MAC Address,
press (Settings) > Network > WLAN >
MAC Address. To find the IP Address, press
(Settings) > Network > WLAN >
TCP/IP > IP Address.
• If the Setup Network "Scan to" name screen
appears, type a name for your Macintosh (up to
15 characters), and then click Next.
The name you type will appear in the
Destination drop-down list in Scan to
Network Device from the Scan tab in Web
Based Management (ADS-1100W only)(see
the User's Guide) or on the LCD of the machine
(ADS-1600W only) when you choose a scan
option. For more information, see the User's
Guide.
The installation is now
Finish
complete and it is time to
do a test scan. See Test
Scan (scan to PDF) on
page 17.
To install optional applications:
Now go to
Page 16
Macintosh