Powering On The System - NEC VERSA UltraLite Service And Reference Manual

clear of objects lets the adapter cool properly during use.
Only use the AC adapter that comes with the NEC Versa notebook. Although other adapters look
similar, using them can damage the system.

Powering on the System

Power on the system as follows:
Locate the latch on the front of the notebook, slide it to the right, and raise the LCD panel.
1.
Locate the Power button and slide it forward to turn on power. For additional information
2.
about power buttons and LEDs, see Section 1, "System Overview."
Note
When powering on the notebook running the Microsoft Windows 2000 operating
system, you might encounter a warning message suggesting that a problem exists with the
hibernation file. The warning message is inaccurate. To disable this message, simply enable
hibernate support.
Connecting the AC adapter
A – Adapter Cable
B – AC Power Port
Do not cover or place objects on the AC adapter. Keeping the adapter
C – AC Adapter
D – Power Cable
System Configuration and Setup 2-3