Table of Contents
Advertisement
Required Tools and Equipment
All NEC Versa UltraLite/DayLite notebook disassembly/reassembly procedures are performed
using the following tools:
set of small Phillips screwdrivers (small and large #0 and #1)
!
set of small flat-head screwdrivers (1/32 inch through 1/8 inch)
!
magnifying glass
!
tweezers.
!
Disassembly
This section contains step-by-step disassembly procedures for the system. Reassembly is the
reverse of disassembly. Each procedure is supported by a simplified disassembly illustration.
The Illustrated Parts Breakdown and parts lists for the system unit are shown in Chapter 5.
For complete disassembly of the system, follow the disassembly order in the following table.
For disassembly of a specific part, go the section containing the part removal procedure.
NEC Versa UltraLite/DayLite Notebook Disassembly Sequence
Sequence
1
2
3
4
5
6
7
8
10
11
12
13
14
When disassembling the notebook, follow these general rules.
Record the BIOS settings before disassembling the notebook. All customized BIOS settings
!
are lost if the CMOS battery is disconnected.
3-2 Disassembly and Reassembly
Part Name
Page
3-3
3-4
3-5
3-6
3-7
3-9
3-9
3-9
3-10
3-10
3-11
3-12
3-12
3-13
Hide quick links:
Advertisement
Table of Contents
