NurseCall Main Unit
4.3.6
Local acknowledgement setting
1.
¬ Parameter Nr. 03
Local Ack.
2.
¬ Local Ack.
3.
4.
5.
¬ Local Ack.
Access Code ? YES
6.
4.3.7
Output relay setting
This parameter sets the relay as a "closing" or "switching" contact.
1.
¬ Parameter Nr. 04
Relay Output
2.
¬ Relay Output
3.
¬ Relay Output
4.
5.
Bosch Security Systems
Select the parameter Nr. 03.
Press
.
Possible ? YES
Activate (YES) or deactivate (NO) the acknowledgement at the NurseCall Main Unit.
Confirm with
.
ACCESS CODE
··
If you have selected YES, enter the access code. Press
Select YES if each acknowledgement must be done by entering the code 45 or NO if a
direct acknowledgement with the Green button shall be enabled. Confirm with
Select the parameter Nr. 04.
Press
.
Func: 'ON'
Select ON if you wish a "closing" relay or ON/OFF if you wish a "switching" relay.
Mode HELP & ASSIST¡
Select the relay activation according to alarms. Choose between:
- Mode HELP & ASSIST
- Mode ASSISTANCE
- Mode FIRE
Confirm with
.
¡
¡
¡
¡
¡
User Manual
Programming | en
then
.
.
F.01U.252.699 | V1.1 | 2012.01
31