Troubleshooting And Error Messages; Radio In Use" Message; Alarm Transmitter Not Stored" Message; Alarm Transmitter Already Stored" Message - Bosch NurseCall Main Unit User Manual

46 en | Troubleshooting and error messages
6

Troubleshooting and error messages

6.1

"Radio in use" message

If you program a transmitter already stored as an alarm transmitter, an error message displays
¯
OK:Continue C:Abort
Press
6.2

"Alarm Transmitter NOT stored" message

If you erase an alarm transmitter that is not already stored, an error message is displayed:
¯ Alarm Transmitter
The unit repeats the error message then skips back to the erasing menu.
6.3

"Alarm Transmitter already stored" message

If you program an acknowledgement transmitter that is already stored as an alarm
transmitter, an error message is displayed:
¯ Alarm Transmitter
The unit then skips back to the programming menu.
6.4

"Ack. Transmitter NOT stored" message

If you erase an acknowledgement transmitter that is not already stored, an error message is
displayed:
¯ Ack. Transmitter
The unit repeats the error message then skips back to the erasing menu.
6.5

"Ack. Transmitter already stored" message

If you program a transmitter that is already stored as an acknowledgement transmitter, an
error message is displayed:
¯ Ack. Transmitter
The unit then skips back to the programming menu.
6.6

The green button does not work

Problem: you have tried unsuccessfully to acknowledge an alarm with the Green button.
Cause: the local acknowledgement is disabled.
Solution: activate the local acknowledgement function.
See Section 4.3.6 Local acknowledgement setting, page 31.
F.01U.252.699 | V1.1 | 2012.01
Radio in use!
to program the transmitter, this overwrites the values. Press
NOT stored!
already stored!
NOT stored!
already stored!
User Manual
NurseCall Main Unit
to abort.
Bosch Security Systems