Checking An Acknowledgement Transmitter; Erasing An Acknowledgment Transmitter - Bosch NurseCall Main Unit User Manual

NurseCall Main Unit

NOTICE!
To program the Free value to 5 or 32, see Section 4.4.10 Maximum number of acknowledgement
transmitters, page 37.
4.5.6

Checking an acknowledgement transmitter

1.
¯ Transmit. type : 1
Ack. Transmitter
2.
3.
¯´ Press Radio
4.
Ack. Transmit.:1
Free:4
XXXX is the ID code of the transmitter.
The unit then goes back to the acknowledgement transmitters menu.
4.5.7

Erasing an acknowledgment transmitter

1.
¯ Transmit. type : 1
Ack. Transmitter
2.
3.
¯ 'OK'= 1 Ack.Trans.
4.
Bosch Security Systems
If the transmitter is not accepted, see Section 6 Troubleshooting and error messages,
page 46.
Select the acknowledgement transmitter type with
Confirm with .
OK:Program
0:Erase ¤:Info
Press to check the transmitter.
Button
Press the button of the transmitter.
Code XXXX
Select the acknowledgement transmitter type with
Confirm with .
OK:Program
0:Erase ¤:Info
Press to select the erase function.
'*'= ALL !
Press to erase ONE acknowledgement transmitter.
¢
¢
User Manual
Programming | en
and .
and .
F.01U.252.699 | V1.1 | 2012.01
41