GE SymVeo SV-XP1 User Manual page 20

14 SymVeo IP Camera
User Manual
3. Enter the web browser and type in the new IP address of
the camera.
4. At the password prompt, use admin for the user ID and
admin for the password (you can add users and change
passwords at any time).
5. Click on the Configure link on the main menu
6. Click the Camera MPEG Settings link in the
Configurations menu.
7. On this menu, look for the Video Format drop down
menu and change it from NTSC to PAL.
8. Click the Save button
9. You will now be able to view video from the BNC out
connector on a PAL monitor, as well as operate the On
Screen Display features of the camera.
Figure 7. The video settings screen