Table of Contents
Advertisement
Programming the camera using
OSD
Use the OSD (on screen display) menus to program the camera.
CAUTION
Figure 8. OSD (onscreen display) menu controls
OSD menu controls:
Use the menu/enter/exit button to enter a menu or to select a menu
option. This button is also used back up through the menus and exit the
OSD.
Use the up and down buttons to move vertically between menus and
options.
Use the right and left buttons to move horizontally to and between
options.
The IP Camera has been programmed at the factory
for the optimal configuration. Only qualified service
personnel should modify these settings.
15
Advertisement
Table of Contents
